- Title
- Improving digital-to-analog converter linearity by large high-frequency dithering
- Creator
- Eielsen, Arnfinn A.; Fleming, Andrew J.
- Relation
- ARC.DP120100487 and ARC FT130100543 http://purl.org/au-research/grants/arc/FT130100543
- Relation
- IEEE Transactions on Circuits and Systems. Part 1: Regular Papers Vol. 64, Issue 6, p. 1409-1420
- Publisher Link
- http://dx.doi.org/10.1109/TCSI.2016.2561778
- Publisher
- Institute of Electrical and Electronics Engineers (IEEE)
- Resource Type
- journal article
- Date
- 2017
- Description
- A new method for reducing harmonic distortion due to element mismatch in digital-to-analog converters is described. This is achieved by using a large high-frequency periodic dither. The reduction in nonlinearity is due to the smoothing effect this dither has on the nonlinearity, which is only dependent on the amplitude distribution function of the dither. Since the high-frequency dither is unwanted in the output of the digital-to-analog converter, the dither is removed by an output filter. The fundamental frequency component of the dither is attenuated by a passive notch filter and the remaining fundamental component and harmonic components are attenuated by the low-pass reconstruction filter. Two methods that further improve performance are also presented. By reproducing the dither on a second channel and subtracting it using a differential amplifier, additional dither attenuation is achieved; and by averaging several channels, the noise-floor of the output is improved. Experimental results demonstrate more than 10 dB improvement in the signal-to-noise-and-distortion ratio.
- Subject
- convolution; digital analog conversion; dither; element mismatch; linearization techniques; nonlinear distortion
- Identifier
- http://hdl.handle.net/1959.13/1355716
- Identifier
- uon:31517
- Identifier
- ISSN:1549-8328
- Language
- eng
- Reviewed
- Hits: 1023
- Visitors: 1188
- Downloads: 0
| Thumbnail | File | Description | Size | Format |
|---|